I have an exercise bike here and today I am going
to show you how to put it together. I assume that you are able to put
the seat and the pedals on your own.
So we will start with the frame. This is the master on this particular machine that sits on to this part of the frame. The problem here is that I might lose the end of these wires somewhere down the whole here. This may become a real problem.
So just to save some time in future I am going to tie the cable to the frame. You can use an elastic band for this. Now I need to make my connections. To do this I am just resting the mast by the side of the machine.
It gives me much space to do my connections. Just make sure that you bring those connectors together in the right way. Push the connectors together and listen to the click. Once you hear it, you know that everything is done correctly.
When the connectors are done and the cables are nice, I can put that mast on the frame. Just place it, make sure that the cables are free, line the holes up and put in the bolts with the spanner. Regard to squeak in and creeks. Tthere are also a couple of fixings on the legs on the front and the back it was worth just checking those because they can work loose. And let’s get to the console. As I secured my wires previously, now I need to take away the cable tie.
Now I can attach the console. Pay attention to the connectors here and make sure you do everything correctly. Don’t bend any pin. In case you bent any, please look at other videos on our blog to restore the pin. When you place the console, you can hide the wires into the column or the console itself. Just make sure that you don’t get any of the wires trapped.
Once you’re happy with that, you can secure the console with the screws. Use the screwdriver to push nice and tight.
So we will start with the frame. This is the master on this particular machine that sits on to this part of the frame. The problem here is that I might lose the end of these wires somewhere down the whole here. This may become a real problem.
So just to save some time in future I am going to tie the cable to the frame. You can use an elastic band for this. Now I need to make my connections. To do this I am just resting the mast by the side of the machine.
It gives me much space to do my connections. Just make sure that you bring those connectors together in the right way. Push the connectors together and listen to the click. Once you hear it, you know that everything is done correctly.
When the connectors are done and the cables are nice, I can put that mast on the frame. Just place it, make sure that the cables are free, line the holes up and put in the bolts with the spanner. Regard to squeak in and creeks. Tthere are also a couple of fixings on the legs on the front and the back it was worth just checking those because they can work loose. And let’s get to the console. As I secured my wires previously, now I need to take away the cable tie.
Now I can attach the console. Pay attention to the connectors here and make sure you do everything correctly. Don’t bend any pin. In case you bent any, please look at other videos on our blog to restore the pin. When you place the console, you can hide the wires into the column or the console itself. Just make sure that you don’t get any of the wires trapped.
Once you’re happy with that, you can secure the console with the screws. Use the screwdriver to push nice and tight.
No comments:
Post a Comment