Wednesday 11 June 2014

Treadmill Support | DOMYOS TC140 ERROR CODES


Error Code: Troubleshooting Guide
Treadmill Er1  speed sensor fault
1 ) Make sure there is nothing stuck inside
2) Check that the speed sensor isn't loose or defective.
3) Replace the speed sensor (buy it here:
Speed sensor for treadmill )

Treadmill Er2 motor connection error
1) Check if the connection cables to the motor are loose. (buy cables here:
chokes, breakers, cables)
2) Please contact us for further tests and to identify the faulty component.

Treadmill Er3 PC or motor system control error
1) Check if the connection cables to the console and to the motor control system (MCB) are loose or damaged.
2) Please contact us for further tests and to identify the faulty component

Need a new controller or motor? Buy it here: 
  1. Treadmill controller 220 to 240 VAC input (Europe / Asia / Australia) 
  2. Treadmill controllers 110-120 VAC input (North America) 
  3. Treadmill motor 
  4. Treadmill motor parts, brushes, holders, fans 
 
Treadmill Er4 protection control system error.
Contact us for further tests and to identify the faulty component

Treadmill Er5  motor protection error.
Contact us for further tests and to identify the faulty component
In most cases, the motor needs to be replaced

Treadmill Er6 motor control system error (MCB).
Contact us for further tests and to identify the faulty component.
In most cases, the controller needs to be replaced or repaired

Treadmill Er7 inclination error (only for versions with electric tilt)
Contact us for further tests and to identify the faulty component
In most cases the motor tilt must be replaced or repaired.

Treadmill Er8 HRC program error (only for versions with cardio program)
1) Verify that the user wields both detectors or wears a heart rate chest strap. (The chest strap is an optional feature).
2) Make sure that the cables of the heart rate detectors are not loose.
3) Please contact us for further tests and to identify the faulty component.

After performing the above checks and steps, try to restart the machine and check if the error is still showing. If the error persists, please contact us for assistance.


Need a new controller or motor? Buy it here: 
  1. Treadmill controller 220 to 240 VAC input (Europe / Asia / Australia) 
  2. Treadmill controllers 110-120 VAC input (North America) 
  3. Treadmill motor 
  4. Treadmill motor parts, brushes, holders, fans 

4 comments:

  1. Replies
    1. Hi, surely it is an engine control problem, you can find spare parts at this link:https://www.partsfortreadmill.com/

      Delete
  2. Replies
    1. Hi, surely it is an engine control problem, you can find spare parts at this link:
      https://www.partsfortreadmill.com/

      Delete