We
report a tip to measure the electric current at initial speed
which works for treadmills branded Body Masters, HealthRider,
Greenmaster, Reebok and others.
1)
Select the value of 40A in direct current on the clamp
of the amperometer
2)
Reset the instrument
3-4)
Hook the red wire of the motor with the clamp and carry out
the reading. The measurement should be done with the treadmill
switched on at the speed of 0.8 km/h.
The measurement
carried out should not exceed 2 A, otherwise it means that there are
probably engine failures (overcurrent / current
leaks).
Buy on our e-shop
spare parts to get assistance on Body Masters, HealthRider,
Greenmaster, Reebok, and
all brands of commercial and domestic treadmills.
No comments:
Post a Comment