Wednesday, 30 April 2014

treadmill technician tips: enter engineering mode on eWay controllers


ENGINEERING  MODE HAS TO BE USED WHEN REPLACING A NEW PCB OR CONSOLE

Turn on the switch, move out safety key, keep pressing ‘MODE‘ key continuously and put safety key again, for 2 seconds, then move the finger away from ’MODE‘ key. The meter will enter ’MODE‘ function:  fill the diameter of front roller, lowest speed, fastest speed, incline degree, when all information is filled, the machine will adjust the starting speed and incline angle automatically.

  • Front roller standard diameter is 42mm.
  • ‘FAST’ or ’SLOW’ means “+ “ or “-”, press ‘SET’ then set the speed.
  • When all information is filled in the windown, 1S is shown on console, AD in distance window,then press “START”,all information will be saved in the meter IC.

    SAFETY WARNING:NO USER MUST STAND ON THE BELT WHEN OPERATE ‘MODE’ FUNCTION!!!
Need a replacement pcb controller or console? Contact us or buy it here: Treadmill controllers
Need other parts? The most comprehensive fitness equipment parts e-shop is online at www.partsfortreadmill.com

No comments:

Post a Comment