StrengthMaster Assistance, Panatta Support, Vision Fitness Support AUTO-DIAGNOSIS for TREADMILLS

Contact us for assistance and spare parts for home and professional fitness.

To enable the self-diagnosis test, do the following:

1. Press the "Enter" and "Up" or "UP" keys simultaneously for 3 seconds

 

2. Press the "Enter" key repeatedly until "AUTO" is displayed

 

3. When the "AUTO" message is displayed, press the "START" and "UP" keys to proceed to self-diagnosis.

 

CAUTION: Do not place your feet on the belt during this procedure.

4. After about 25 seconds, if the treadmill is working properly, the display should be blank (no signal).

 

5. Press the "ENTER" key simultaneously and press "UP" to exit the self-diagnosis function.

 http://www.partsfortreadmill.com/