Code
Error Troubleshooting Guide
Er1
treadmill speed sensor error
1)
Check that there is nothing internally stuck
2)
Check that the speed sensor is not loose or defective.
3)
Replace the speed sensor
http://www.partsfortreadmill.com/index.php/parts-for-treadmill/speed-sensor-for-treadmill/
Er2
treadmill motor connection error
1)
Check if the motor connection cables are loose.
2)
Contact us for further testing and identifying the defective
component.
Er3
treadmill Error PC/display board and control board system error
1)
Check whether the connection cables to the console and the MCB are
loose or damaged. Replace if it’s the case
http://www.partsfortreadmill.com/index.php/parts-for-treadmill/transformers-chokes-breakers/
2)
Contact us for further testing and identifying the defective
component
Er4
treadmill control system failure error.
Please
contact us for further testing and identifying the defective
component
Er5
treadmill Motor protection fault.
Please
contact us for further testing and identifying the defective
component
In
most cases the motor should be replaced
Er6
treadmill motor Control System Error (MCB).
Please
contact us for further testing and identifying the defective
component
In
most cases the controller should be replaced or repaired
Er7
treadmill Tilting error (only for versions with electric inclination)
Please
contact us for further testing and identifying the defective
component
In
most cases, the tilt engine must be replaced or repaired
Er8
treadmill HRC program error (only for versions with cardio program)
1) Verify that the user has both hands in firm
contact with handpulse or he is wearing a chest strap. (The chest
strap is an optional feature).
2)
Verify that the heart rate monitor cables are not loose / if
handpulse sensor.
3)
Contact us for further testing and identifying the defective
component.
After
performing the checks and operations outlined above, try switching
the machine back on and see if the error is still displayed. If the
error persists, contact us for assistance.
Hi i have purchased a domyos treadmil yesterday. Have used it twice and got the same error twice.
ReplyDeleteI use the quick start (not choose a specific programme) and it shows distance travelled and time corrrect. However at one point ( approx after 25mins time and distance mark 9.99 and eont show the correct time and distance travelled.
How can this be fixed?
What is the E 15 error code mean
ReplyDelete