Wednesday, 2 September 2015

Model T912 / T914 / T916 by Nautilus. Viewing Maintenance Information | Engineer mode for treadmills

Treadmill Model T912

The total time and distance the treadmill has been in use can be viewed using the Maintenance Screens.

This information can help you schedule treadmill maintenance and check treadmill usage.
To view the treadmill’s  total Run-time and total Distance information:

1. Press and hold ENTER and STOP keys on the console for at least 3 seconds.
2. Use the INCLINE UP/DOWN keys to scroll to ConF selection.
3. Press the QUICKSTART key.
4. Use the INCLINE UP/DOWN keys to scroll to view TOTAL HOURS and TOTAL MILES.
Model T914 & T916
In addition to the total time, the distance the T914 or T916 treadmill has been in use can be viewed using
the Machine Status console codes.
To view the treadmill’s run-time information:

1.  Press the SPEED UP key on Ergo Bar, then 4, ENTER on the console.
2. The words "Machine Status" will be displayed.
3. Press the SPEED UP key on Ergo Bar, and scroll to "Run Hours".
4. The current Run Hours will be displayed.
5. Press the CLEAR key to exit. 
To view the total distance the treadmill has been used:
1.  Press the SPEED UP key on Ergo Bar, then 4, ENTER on the console.
2. The words "Machine Status" will be displayed.
3. Press the SPEED UP key on Ergo Bar and scroll to "Distance".
4. The current Distance in the current machine units (Miles/KM) will be displayed.
5. Press CLEAR to exit.

Routine Maintenance Schedules
Performing routine maintenance will help prevent unnecessary wear to the treadmill and/or injury to the user. The maintenance schedules are meant only to serve as a guide. Depending on where and how the treadmill is being used, more frequent routine maintenance may be required.

No comments:

Post a comment