Sunday 1 December 2013

Treadmill Error Troubleshooting

Errors for Lohas Strengthmaster Range, MCB SMM2100 and SMM2150



Treadmill Error E1
1.    Check the speed sensor connections, ensure they are fitted correctly.
2.    Check for any damage to sensor or magnet in rollers pulley.
3.    Note: the sensor and magnet should be within 2 – 3 mm of each other.
4.    If E1 still there contact your local distributor for assistance.

Treadmill Error E2
1.    Check all wiring to MCB, PCB and Motor.
2.    If E2 still there contact your local distributor for assistance.

Treadmill Error E4 (Only with HRC program)
1.    Ensure you have a good grip on Heart rate sensors on the handlebars.
2.    Make sure hands are moist (Aloe Vera helps)
3.    If using the wireless HR straps please follow as per owners manual.
4.    Check battery.
5.    Check all wiring to and from the Incline motor.
6.    If E4 still there contact your local distributor for assistance.

Treadmill Error E6
1.    Check all wiring to and from the Incline motor.
2.    If E6 still there contact your local distributor for assistance.

Treadmill Error E7
1.    Check all wiring to and from the Incline motor.
2.    If E7 still there contact your local distributor for assistance.

Treadmill Error E9
1.    Check all wiring from Base to console.
2.    If E9 still there contact your local distributor for assistance.

Treadmill Error N/A
1.    If the console is not lighting up or is erratic, check power is correctly connected. Check Safety Key is also in place.
2.    Running belt won’t stay centered, ensure treadmill is on a level surface, or refer to the instructions in this owner’s manual on how to adjust belt.
3.    Treadmill motor seems strained; check the running deck and belt have sufficient lubrication.
4.    Treadmill belt slips during use; refer to the instructions in this owner’s manual on how to adjust belt.

1 comment:

  1. Respected sir/mam
    Sir plz provide me SMM2150 pcb board pic and also tell which one I.C power supplly. And provide power supply ic no.
    Thanking you

    ReplyDelete