Monday, 9 December 2013

Running Belt Tension Adjustment

Caution:
Over-tightening of the roller will severely shorten the life of the belt and may cause further damage to other components.


Running Belt:
If when you plant your foot on the belt, you can feel slipping sensation then the belt has stretched and is
slipping across the rollers. This is a normal and common adjustment on a new treadmill.    
To eliminate this slipping, rotate the two Allen bolts of rear roller by 1/4 TURN as diagram shown.
Try the treadmill again to check for slipping.    Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time.
 
The right tension of running belt is 0.9 - 1.1 lb.

Buy treadmill belts on our ecommerce

No comments:

Post a comment