Monday 7 October 2013

treadmill error e3 e4

E3:
speed 
sensor 
error
1.can not read the signal from working motor within 15 seconds.
1.check the location of speed sensor and roller magnetic,these two parts should within 3 mm
2.can not read the signal from speed sensor within 10 seconds.
2.check the speed sensor work well, use a magnetic (safety key) to check,the sensor inside have two pins, should close or open when roller magnetic close it. 
 
 
 
 
E4
 incline 
wire
1.incline motor VR wire not on right position.
1.rework the VR cable head to be sure on right position.
2.incline motor AC wire not on right position
2.incline motor AC wire insert again to be sure right.
3.incline motor connect wire is broken.
3.change connect wire or change the incline motor
 
 
Buy here: replacement sensor and incline motor

5 comments:

  1. Er4 treadmill no use incline

    ReplyDelete
  2. Er4 treadmill no use incline

    ReplyDelete
    Replies
    1. May be controller or incline motor. First please check the incline motor. You may need to replace it and you can find here the replacement parts https://www.partsfortreadmill.com/

      Delete
  3. My body structure treadmill will work for 2sec and stop and show e4 pls what do I do?thank you am Dani omogbai

    ReplyDelete
    Replies
    1. hi, it may be the speed sensor faulty, you can find any spare at this link: https://www.partsfortreadmill.com/

      Delete