E3:
speed sensor error |
1.can
not read the signal from working motor within 15 seconds.
|
1.check
the location of speed sensor and roller magnetic,these two parts should
within 3 mm
|
2.can
not read the signal from speed sensor within 10 seconds.
|
2.check
the speed sensor work well, use a magnetic (safety key) to check,the sensor
inside have two pins, should close or open when roller magnetic close
it.
|
|
E4：
incline wire |
1.incline
motor VR wire not on right position.
|
1.rework
the VR cable head to be sure on right position.
|
2.incline
motor AC wire not on right position
|
2.incline
motor AC wire insert again to be sure right.
|
|
3.incline
motor connect wire is broken.
|
3.change
connect wire or change the incline motor
|
|
Monday 7 October 2013
treadmill error e3 e4
Subscribe to:
Post Comments (Atom)
Er4 treadmill no use incline
ReplyDeleteEr4 treadmill no use incline
ReplyDeleteMay be controller or incline motor. First please check the incline motor. You may need to replace it and you can find here the replacement parts https://www.partsfortreadmill.com/
DeleteMy body structure treadmill will work for 2sec and stop and show e4 pls what do I do?thank you am Dani omogbai
ReplyDeletehi, it may be the speed sensor faulty, you can find any spare at this link: https://www.partsfortreadmill.com/
Delete