Over time
the walking belt may begin to slip. This can happen if the belt is too loose. You
can tighten the belt using an allen wrench.
When
tightening the belt turn both the left and right idler bolts the same distance
and direction with the belt stopped. Start by turning the idler bolts in one
half turn increments followed by one quarter turns for finer adjustments.
After
each adjustment, test on the treadmill. Repeat these steps until the slipping
no longer occurs. DON’T overtighten the belt, if the belt keeps slipping you
may need to replace it or look for other problems on the treadmill.
If you
need a new belt, please buy on https://www.partsfortreadmill.com/parts-for-treadmill/belt-for-treadmill/
No comments:
Post a Comment