Replacing speed sensor for treadmills, bikes and elliptical trainers.

Wednesday, 20 July 2016

Replacing speed sensor for treadmills, bikes and elliptical trainers.

If you get E-1, E-2, E-3, L5, LS, please check your sensor and replace it to solve the problem.

Magnetic Sensor
It is used with a magnet placed on the pulley of the treadmill or exercise bike, different types available (round-shaped or square). Connector has two pins, cable length is 110 cm.

Buy Treadmill Speed Sensor | Magnetic

Optical Sensor

It is connected to the motor fan and reads speed directly from motor fan. There are two main versions: with 4-pin cable or 3-pin cable.

Buy Treadmill Speed Sensor | Optic 4 pins

Buy Treadmill Speed Sensor | Optic 3 pins

No comments:

Post a Comment

Warning - Legal Disclaimer

All information in this blog is directed to professional technicians.

We take no responsibility for personal injury or damage sustained by, or through the use of your treadmill or maintenance operations

To prevent electrical shock, be certain the treadmill is turned off and unplugged before cleaning and maintenance.

We have made every attempt to ensure the accuracy and reliability of the information provided on this website. However, the information is provided "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, completeness, legality, or reliability of the information contained on this website.

No warranties, promises and/or representations of any kind, expressed or implied, are given as to the nature, standard, accuracy or otherwise of the information provided in this website nor to the suitability or otherwise of the information to your particular circumstances.

We shall not be liable for any loss or damage of whatever nature (direct, indirect, consequential, or other) whether arising in contract, tort or otherwise, which may arise as a result of your use of (or inability to use) this website, or from your use of (or failure to use) the information on this site.