Tunturi Service Setting Mode Treadmill T20 ~ T80

Service Setting Mode T20~T60

 
Press and hold “MODE/ ENTER” button first, also press and hold “SPEED +” button to enter service mode.
Service Setting mode knows 12 stages.
Use Speed or Incline “UP/ DOWN” button to change value where possible.
use “MODE/ ENTER” button to confirm and go to next stage.

1st stage: EN mode
Version information of console software.
This information is not able to change.

2nd stage: Y mode
Console software Year of release information.
This information is not able to change.

3rd stage: D mode
Console software Day/ Month of release information.
This information is not able to change.

4th stage: T mode
Console software Time of release information.
This information is not able to change.

5th stage: T mode
Informs the console software model type. ( T20 ~T60)
This information is not able to change.

6th stage: R mode
Front roller diameter setting in MM.
Parameter can be updated ± 10 ( range 300~800)
Default setting: 600mm ( do not change this value )

7th stage: Units mode
Setting for console measuring parameters in Imperial or
metric setting.
Si= Metric system ( kilometers/ Kilograms )
En= Imperial system (Miles/ Lbs )
Default setting: Si.

8th stage: Distance mode
Informs the total ran distance in KM/ MLS.
This information is not able to change.

9th stage: Time mode
Informs the total ran time in hours..
This information is not able to change.

10th stage: PT mode
Shows the set Pause time, before trainer shuts in standby
mode.
Parameter can be updated in 90 - 180 - 300 (Seconds)
Default setting: 90 (Seconds)

11th stage: BZ Mode
Console acoustic buzzer mode, for button press, and
program notifications.
On= Buzzer in “On” mode, acoustic buzzer is on.
Off= Buzzer in “Off” mode, acoustic buzzer is off.
Default setting: On.

12th stage: Init Mode
Console setting for resume speed after pauze mode.
1= Init in “On” mode, speed will resume, at speed before set in pause mode.
0= Init in “Off” mode, speed will not resume, at speed before set in pause mode, and thus re-starts at
minimum speed.