Friday, 29 June 2018

Assistance for treadmills: MyFit, Hyperfit, Starter, Toorx and some maintenance advice

To help ensure a long service life of the treadmill, routine maintenance should be performed.
Every week:
remove dust, dirt or any traces of sweat from the treadmill with a damp cloth. Do not use detergents under the running belt. Be careful not to throw water or allow moisture to pass between the edges of the display panel and the console. Inspect the belt to make sure it runs straight and smoothly.
Every 15 days or according to use
It is important to lubricate the running board by applying silicone spray to improve the performance of the treadmill. The lubricant must be applied between the belt and the walking deck, in the contact parts subject to greater friction and wear, i.e. towards the center.


Every month:
Vacuum to remove dust or dirt that may form under or on the sides of the treadmill. Check the components of the treadmill structure to make sure that the mounting screws are not loosened, and tighten them if necessary.
In case the decals placed on the sides of the main frame of the treadmill are unglued, simply heat them with the hair dryer and apply light pressure with the hand to make them adhere to the surface.
If the protective plastic of the console is removed, it is advisable to clean it to remove glue residues especially on the bright LEDs.
In case you need assistance contact us.

No comments:

Post a comment