Wednesday 9 February 2022

How to reset Ifit console

 If the console does not boot up properly, or if the console freezes and does not respond, you could reset
the console to the factory default settings.

IMPORTANT


Doing this will erase all custom settings you have made to the console.
Resetting the console requires two people.


First unplug the power cord and press the power switch Next, locate the small reset opening near the USB port on the console. Using a bent paper clip, press and hold the reset button inside the opening, and have a second person plug in the power cord and press the power switch.


Continue holding the reset button until the console turns on When the reset operation is complete, the console will turn off and then turn back on. If it does not, press the power switch off and then on again Once the console turns on, check for firmware updates.

Note: It may take a few minutes for the console to be ready for use.




No comments:

Post a Comment