Thursday, 29 August 2013

Running Belt Tension Adjustment

Caution:       Over-tightening of the roller will severely shorten the life of the belt and may cause further damage to other components.

Running Belt - treadmill belt adjustment:
If when you plant your foot on the belt, you can feel slipping sensation then the belt has stretched and is
slipping across the rollers. This is a normal and common adjustment on a new treadmill.    
To eliminate this slipping, rotate the two Allen bolts of rear roller by 1/4 TURN as diagram shown.    Try
the treadmill again to check for slipping.    Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time.
Perfect  Tension  of  Running  Belt:  0.99 ~1.1 lbs

Buy running belts in our eShop: shipment worldwide, convenient prices: 

Tuesday, 20 August 2013

Treadmill running deck removal and replacement | decks from EUR 53, GBP 50, USD 70

Removal Steps:

A. Remove the 8 deck screws on the deck which connecting to frame with a
Phillip/Cross screwdriver.
treadmill running deck replacement

B. Slide and pull the deck out.
treadmill running deck replacement
Replacement Steps:

A.  Replace the deck by sliding it inside the belt, front end first. (Make sure that
the smooth side faces up)
B.  Align the deck with the holes for the 8 deck screws and fasten these screws

For treadmill replacement decks please contact us at

Decks price starting from € 53, USD 70, GBP 50 + shipment. All brands available, decks made to order from quality supplier.